B&D Controll-A-Door ShedMaster Spécifications télécharger pdf (Page 4)

4

FEATURES

OPERATION

To open or close the door simply press

the hand held transmitter or the wall

mounted transmitter for two seconds

During an open or close cycle the door

can be stopped by pressing the button

while the door is in motion.

The next actuation will move the door

in the opposite direction.

SECURITY CODE STORE

The Shed Master Garage Door Opener

uses state of the art technology in

storing your selected transmitter

security code. Up to six unique

transmitters can be stored in the openers

memory, plus one dipswitch unit and an

entry keypad.

WEATHERPROOF DESIGN

The opener’s control board is housed in

a weather-proof enclosure rated to IP24.

This offers protection from rain

however the unit should not be sprayed

by a hose or any other water carrying

device.

AUTOMATIC LIMITS

POSITIONING

The limits system automatically

calculates the doors’ travel limits and

stores it in memory. If the door is

moved manually within the travel limits

during a power failure, it will recognise

this once the power is restored and stop

at the correct limit position if the door is

activated.

INTELLIGENT FORCE MARGIN

SAFETY OBSTRUCTION SYSTEM

While the door is performing a close

cycle, should it hit an obstacle or be

restricted in some manner, it will

automatically reverse. The amount of

force the door should encounter before

reversing is automatically adjusted by

the doors control system during the

initialisation of the automatic door

opener. The door will also stop if

restricted whilst opening. The Safety

Obstruction Force should be checked at

least once a month. See installation

manual for instructions.

LOCKABLE CONTROL PANEL

The control panel can be locked and

disabled to prevent tampering. This is

useful if the opener is to be mounted on

an exposed carport or a perimeter door.

Locking the control panel will prevent

operating the door via the Operate

button, re profiling, clearing limits,

clearing transmitters, changing force

margins, and coding transmitters.

OVER LOAD INDICATOR

When the maximum opening and

closing capacity of the opener is

exceeded an audible beeper will sound

to indicate that an overload has

occurred.

PHOTO ELECTRIC BEAM

(OPTIONAL)

The opener has an input for a photo

electric beam to be connected for extra

safety protection and use of the auto

close mode.

MANUAL OPERATION

The opener is equipped with a unique

patented manual disengaging device. If

the power to the opener is disrupted for

any reason the door can be put into

manual mode by pulling down on the

string handle, then releasing. This will

allow you to manually open or close the

door. When power is restored, by

pulling down on the string handle and

releasing, the opener is put back into

automatic mode.

SECURITY LOCK FOR MANUAL

RELEASE HANDLE (OPTIONAL)

For added security the manual release

handle can be locked out or disabled.

This is ideal if the opener is to be

mounted on a perimeter door in an

exposed carport.

©Copyright 2006 B&D Doors

Thank you for purchasing the B&D

Controll-A-Door® ShedMaster Automatic

Rolling Garage Door Opener. This opener

is designed to suit vertical operating

continuous curtain rolling doors. The

components and materials used in this

opener are of the latest technology and

highest quality. Listed below are some of

the many features.

1 2 3 4 5 6 7 8 9 ... 19 20

Commentaires sur ces manuels

Pas de commentaire